Blog

AI Mixing in Claude: How to Mix and Master Your Song

Bandmixr brings AI mixing and mastering into Claude. Check a song for free, mix your stems and change the mix just by asking, without leaving the chat.

Piano and Voice: Recording a Keyboard Direct vs an Upright With Mics

A digital piano through two cables and an upright with two mics are different recordings with different problems. What to plug in, where to put the mics, and how each one mixes.

How to Mix a Song You Produced in Logic, FL Studio or Ableton Without Learning to Mix

Producing and mixing are different skills, and you only need one of them. What to leave in your stems, what to take out, how to export, and how to get a mix without spending a year on tutorials.

How to Record and Mix Guitar and Voice at Home With One Interface

Two inputs, two mics, one take. How to place them so the guitar stays out of the vocal mic, when to overdub instead, and what the acoustic profile does with the result.

Bandmixr vs Cryo Mix: Toolbox or Engine? (2026)

Cryo Mix is a producer's toolbox with a chat assistant and credits per download. Bandmixr is a genre-driven engine on a flat plan. Which one fits depends on how much you want to operate.

How to Mix Vocals Over a Beat You Bought

Bandmixr vs eMastered: One Masters Your File, One Mixes Your Band (2026)

eMastered polishes a finished stereo mix. Bandmixr mixes your raw stems first, then masters.

How to Record Vocals in a Rehearsal Room (No Booth, No Acoustic Treatment)

How to Record Drums With 1, 2, 3 or 4 Mics

Is Your Mix Ready for Release? Check It Free in Your Browser

Before you send a track to distributors, five numbers decide how it will sound on Spotify. The free Bandmixr Mix Analyzer measures all of them in your browser, in about a minute, without uploading anything.

How Many Stems for Mixing?

How to Export Stems in Logic, Ableton, FL Studio, Reaper & GarageBand

Exact stem export steps for GarageBand, Logic, Ableton Live, FL Studio and Reaper

How to Mix a Live Band Recording: Bleed, Phase, and Crowd Noise

Best Mixer for Recording Band Practice: 3 Budget Multitrack Rigs

Can You Mix a Single Stereo File? What to Upload Instead

Pick Your Master Loudness

A decision guide to what LUFS to master at

WAV, FLAC or MP3?

The Right File Format to Upload to Your Distributor

AI Mixing vs a Human Engineer

A look at AI mixing vs hiring a mixing engineer

Why Your Band's Mix Sounds Muddy and Amateur

Muddy mixes almost always come from one place, too much energy stacked in the low-mids. Here is what causes it and how to carve it out.

How Much Headroom to Leave Before Mastering

How to Mix a Full Band From Stems

A practical walkthrough for balancing your full band from individual stems

Bandmixr vs LANDR: Which One Do You Actually Need? (2026)

The True Cost of Getting Your Music Mixed

What does it actually cost to get your music mixed? A clear breakdown of hiring an engineer, learning it yourself, and online services

The 5 Most Common Mistakes in Home Recordings (and How to Avoid Them)

Clipping, bad gain staging, phase problems, noise, and mono-incompatible stereo.

The Best AI Mixing and Mastering Services Compared (2026)

We compare Bandmixr, LANDR, eMastered, RoEx, Cryo Mix and BandLab

We'll Never Train AI on Your Music

How to Split a 2-Hour Jam Session into Individual Tracks

Bandmixr's Rehearsal Cutter detects song boundaries automatically

What Are Stems and Why Do They Matter?

Stems are the building blocks of every mix. Here's what they are, why they make a difference, and how to export them cleanly from any DAW.

Genre Matters: How Rock, Jazz, and Electronic Mixes Differ

Compression, EQ, reverb, panning. Every parameter shifts depending on the genre.

How to Record a Band Rehearsal That's Actually Mixable

Here's how to set up multitrack recording that actually produces mixable stems.

A Beginner's Guide to Panning: Where Should Each Instrument Sit?

Learn where each instrument belongs

Mixing vs. Mastering: What's the Difference and Why You Need Both

Here's what each step actually does

What Happens to Your Stems Inside Bandmixr

How Bandmixr turns raw stems into a finished mix: analysis, a six-layer decision engine, processing, quality checks, and final mastering.

How to automatically Mix a Zoom LiveTrak Session

You captured a full band on a Zoom LiveTrak. Now you have 12 clean stems and no idea how to mix them?

Why We Built Bandmixr

Most band recordings never get released. Not because they're bad, but because mixing is hard. We built Bandmixr to close that gap.